Mini Shell

<?php

/////////////////////////////////////////////////////////////////
/// getID3() by James Heinrich <info@getid3.org>               //
//  available at https://github.com/JamesHeinrich/getID3       //
//            or https://www.getid3.org                        //
//            or http://getid3.sourceforge.net                 //
//  see readme.txt for more details                            //
/////////////////////////////////////////////////////////////////
//                                                             //
// module.audio.ac3.php                                        //
// module for analyzing AC-3 (aka Dolby Digital) audio files   //
// dependencies: NONE                                          //
//                                                            ///
/////////////////////////////////////////////////////////////////

if (!defined('GETID3_INCLUDEPATH')) { // prevent path-exposing attacks that access modules directly on public webservers
	exit;
}

class getid3_ac3 extends getid3_handler
{
	/**
	 * @var array
	 */
	private $AC3header = array();

	/**
	 * @var int
	 */
	private $BSIoffset = 0;

	const syncword = 0x0B77;

	/**
	 * @return bool
	 */
	public function Analyze() {
		$info = &$this->getid3->info;

		///AH
		$info['ac3']['raw']['bsi'] = array();
		$thisfile_ac3              = &$info['ac3'];
		$thisfile_ac3_raw          = &$thisfile_ac3['raw'];
		$thisfile_ac3_raw_bsi      = &$thisfile_ac3_raw['bsi'];


		// http://www.atsc.org/standards/a_52a.pdf

		$info['fileformat'] = 'ac3';

		// An AC-3 serial coded audio bit stream is made up of a sequence of synchronization frames
		// Each synchronization frame contains 6 coded audio blocks (AB), each of which represent 256
		// new audio samples per channel. A synchronization information (SI) header at the beginning
		// of each frame contains information needed to acquire and maintain synchronization. A
		// bit stream information (BSI) header follows SI, and contains parameters describing the coded
		// audio service. The coded audio blocks may be followed by an auxiliary data (Aux) field. At the
		// end of each frame is an error check field that includes a CRC word for error detection. An
		// additional CRC word is located in the SI header, the use of which, by a decoder, is optional.
		//
		// syncinfo() | bsi() | AB0 | AB1 | AB2 | AB3 | AB4 | AB5 | Aux | CRC

		// syncinfo() {
		// 	 syncword    16
		// 	 crc1        16
		// 	 fscod        2
		// 	 frmsizecod   6
		// } /* end of syncinfo */

		$this->fseek($info['avdataoffset']);
		$tempAC3header = $this->fread(100); // should be enough to cover all data, there are some variable-length fields...?
		$this->AC3header['syncinfo']  =     getid3_lib::BigEndian2Int(substr($tempAC3header, 0, 2));
		$this->AC3header['bsi']       =     getid3_lib::BigEndian2Bin(substr($tempAC3header, 2));
		$thisfile_ac3_raw_bsi['bsid'] = (getid3_lib::LittleEndian2Int(substr($tempAC3header, 5, 1)) & 0xF8) >> 3; // AC3 and E-AC3 put the "bsid" version identifier in the same place, but unfortnately the 4 bytes between the syncword and the version identifier are interpreted differently, so grab it here so the following code structure can make sense
		unset($tempAC3header);

		if ($this->AC3header['syncinfo'] !== self::syncword) {
			if (!$this->isDependencyFor('matroska')) {
				unset($info['fileformat'], $info['ac3']);
				return $this->error('Expecting "'.dechex(self::syncword).'" at offset '.$info['avdataoffset'].', found "'.dechex($this->AC3header['syncinfo']).'"');
			}
		}

		$info['audio']['dataformat']   = 'ac3';
		$info['audio']['bitrate_mode'] = 'cbr';
		$info['audio']['lossless']     = false;

		if ($thisfile_ac3_raw_bsi['bsid'] <= 8) {

			$thisfile_ac3_raw_bsi['crc1']       = getid3_lib::Bin2Dec($this->readHeaderBSI(16));
			$thisfile_ac3_raw_bsi['fscod']      =                     $this->readHeaderBSI(2);   // 5.4.1.3
			$thisfile_ac3_raw_bsi['frmsizecod'] =                     $this->readHeaderBSI(6);   // 5.4.1.4
			if ($thisfile_ac3_raw_bsi['frmsizecod'] > 37) { // binary: 100101 - see Table 5.18 Frame Size Code Table (1 word = 16 bits)
				$this->warning('Unexpected ac3.bsi.frmsizecod value: '.$thisfile_ac3_raw_bsi['frmsizecod'].', bitrate not set correctly');
			}

			$thisfile_ac3_raw_bsi['bsid']  = $this->readHeaderBSI(5); // we already know this from pre-parsing the version identifier, but re-read it to let the bitstream flow as intended
			$thisfile_ac3_raw_bsi['bsmod'] = $this->readHeaderBSI(3);
			$thisfile_ac3_raw_bsi['acmod'] = $this->readHeaderBSI(3);

			if ($thisfile_ac3_raw_bsi['acmod'] & 0x01) {
				// If the lsb of acmod is a 1, center channel is in use and cmixlev follows in the bit stream.
				$thisfile_ac3_raw_bsi['cmixlev'] = $this->readHeaderBSI(2);
				$thisfile_ac3['center_mix_level'] = self::centerMixLevelLookup($thisfile_ac3_raw_bsi['cmixlev']);
			}

			if ($thisfile_ac3_raw_bsi['acmod'] & 0x04) {
				// If the msb of acmod is a 1, surround channels are in use and surmixlev follows in the bit stream.
				$thisfile_ac3_raw_bsi['surmixlev'] = $this->readHeaderBSI(2);
				$thisfile_ac3['surround_mix_level'] = self::surroundMixLevelLookup($thisfile_ac3_raw_bsi['surmixlev']);
			}

			if ($thisfile_ac3_raw_bsi['acmod'] == 0x02) {
				// When operating in the two channel mode, this 2-bit code indicates whether or not the program has been encoded in Dolby Surround.
				$thisfile_ac3_raw_bsi['dsurmod'] = $this->readHeaderBSI(2);
				$thisfile_ac3['dolby_surround_mode'] = self::dolbySurroundModeLookup($thisfile_ac3_raw_bsi['dsurmod']);
			}

			$thisfile_ac3_raw_bsi['flags']['lfeon'] = (bool) $this->readHeaderBSI(1);

			// This indicates how far the average dialogue level is below digital 100 percent. Valid values are 1-31.
			// The value of 0 is reserved. The values of 1 to 31 are interpreted as -1 dB to -31 dB with respect to digital 100 percent.
			$thisfile_ac3_raw_bsi['dialnorm'] = $this->readHeaderBSI(5);                 // 5.4.2.8 dialnorm: Dialogue Normalization, 5 Bits

			$thisfile_ac3_raw_bsi['flags']['compr'] = (bool) $this->readHeaderBSI(1);       // 5.4.2.9 compre: Compression Gain Word Exists, 1 Bit
			if ($thisfile_ac3_raw_bsi['flags']['compr']) {
				$thisfile_ac3_raw_bsi['compr'] = $this->readHeaderBSI(8);                // 5.4.2.10 compr: Compression Gain Word, 8 Bits
				$thisfile_ac3['heavy_compression'] = self::heavyCompression($thisfile_ac3_raw_bsi['compr']);
			}

			$thisfile_ac3_raw_bsi['flags']['langcod'] = (bool) $this->readHeaderBSI(1);     // 5.4.2.11 langcode: Language Code Exists, 1 Bit
			if ($thisfile_ac3_raw_bsi['flags']['langcod']) {
				$thisfile_ac3_raw_bsi['langcod'] = $this->readHeaderBSI(8);              // 5.4.2.12 langcod: Language Code, 8 Bits
			}

			$thisfile_ac3_raw_bsi['flags']['audprodinfo'] = (bool) $this->readHeaderBSI(1);  // 5.4.2.13 audprodie: Audio Production Information Exists, 1 Bit
			if ($thisfile_ac3_raw_bsi['flags']['audprodinfo']) {
				$thisfile_ac3_raw_bsi['mixlevel'] = $this->readHeaderBSI(5);             // 5.4.2.14 mixlevel: Mixing Level, 5 Bits
				$thisfile_ac3_raw_bsi['roomtyp']  = $this->readHeaderBSI(2);             // 5.4.2.15 roomtyp: Room Type, 2 Bits

				$thisfile_ac3['mixing_level'] = (80 + $thisfile_ac3_raw_bsi['mixlevel']).'dB';
				$thisfile_ac3['room_type']    = self::roomTypeLookup($thisfile_ac3_raw_bsi['roomtyp']);
			}


			$thisfile_ac3_raw_bsi['dialnorm2'] = $this->readHeaderBSI(5);                // 5.4.2.16 dialnorm2: Dialogue Normalization, ch2, 5 Bits
			$thisfile_ac3['dialogue_normalization2'] = '-'.$thisfile_ac3_raw_bsi['dialnorm2'].'dB';  // This indicates how far the average dialogue level is below digital 100 percent. Valid values are 1-31. The value of 0 is reserved. The values of 1 to 31 are interpreted as -1 dB to -31 dB with respect to digital 100 percent.

			$thisfile_ac3_raw_bsi['flags']['compr2'] = (bool) $this->readHeaderBSI(1);       // 5.4.2.17 compr2e: Compression Gain Word Exists, ch2, 1 Bit
			if ($thisfile_ac3_raw_bsi['flags']['compr2']) {
				$thisfile_ac3_raw_bsi['compr2'] = $this->readHeaderBSI(8);               // 5.4.2.18 compr2: Compression Gain Word, ch2, 8 Bits
				$thisfile_ac3['heavy_compression2'] = self::heavyCompression($thisfile_ac3_raw_bsi['compr2']);
			}

			$thisfile_ac3_raw_bsi['flags']['langcod2'] = (bool) $this->readHeaderBSI(1);    // 5.4.2.19 langcod2e: Language Code Exists, ch2, 1 Bit
			if ($thisfile_ac3_raw_bsi['flags']['langcod2']) {
				$thisfile_ac3_raw_bsi['langcod2'] = $this->readHeaderBSI(8);             // 5.4.2.20 langcod2: Language Code, ch2, 8 Bits
			}

			$thisfile_ac3_raw_bsi['flags']['audprodinfo2'] = (bool) $this->readHeaderBSI(1); // 5.4.2.21 audprodi2e: Audio Production Information Exists, ch2, 1 Bit
			if ($thisfile_ac3_raw_bsi['flags']['audprodinfo2']) {
				$thisfile_ac3_raw_bsi['mixlevel2'] = $this->readHeaderBSI(5);            // 5.4.2.22 mixlevel2: Mixing Level, ch2, 5 Bits
				$thisfile_ac3_raw_bsi['roomtyp2']  = $this->readHeaderBSI(2);            // 5.4.2.23 roomtyp2: Room Type, ch2, 2 Bits

				$thisfile_ac3['mixing_level2'] = (80 + $thisfile_ac3_raw_bsi['mixlevel2']).'dB';
				$thisfile_ac3['room_type2']    = self::roomTypeLookup($thisfile_ac3_raw_bsi['roomtyp2']);
			}

			$thisfile_ac3_raw_bsi['copyright'] = (bool) $this->readHeaderBSI(1);         // 5.4.2.24 copyrightb: Copyright Bit, 1 Bit

			$thisfile_ac3_raw_bsi['original']  = (bool) $this->readHeaderBSI(1);         // 5.4.2.25 origbs: Original Bit Stream, 1 Bit

			$thisfile_ac3_raw_bsi['flags']['timecod1'] = $this->readHeaderBSI(2);            // 5.4.2.26 timecod1e, timcode2e: Time Code (first and second) Halves Exist, 2 Bits
			if ($thisfile_ac3_raw_bsi['flags']['timecod1'] & 0x01) {
				$thisfile_ac3_raw_bsi['timecod1'] = $this->readHeaderBSI(14);            // 5.4.2.27 timecod1: Time code first half, 14 bits
				$thisfile_ac3['timecode1'] = 0;
				$thisfile_ac3['timecode1'] += (($thisfile_ac3_raw_bsi['timecod1'] & 0x3E00) >>  9) * 3600;  // The first 5 bits of this 14-bit field represent the time in hours, with valid values of 0�23
				$thisfile_ac3['timecode1'] += (($thisfile_ac3_raw_bsi['timecod1'] & 0x01F8) >>  3) *   60;  // The next 6 bits represent the time in minutes, with valid values of 0�59
				$thisfile_ac3['timecode1'] += (($thisfile_ac3_raw_bsi['timecod1'] & 0x0003) >>  0) *    8;  // The final 3 bits represents the time in 8 second increments, with valid values of 0�7 (representing 0, 8, 16, ... 56 seconds)
			}
			if ($thisfile_ac3_raw_bsi['flags']['timecod1'] & 0x02) {
				$thisfile_ac3_raw_bsi['timecod2'] = $this->readHeaderBSI(14);            // 5.4.2.28 timecod2: Time code second half, 14 bits
				$thisfile_ac3['timecode2'] = 0;
				$thisfile_ac3['timecode2'] += (($thisfile_ac3_raw_bsi['timecod2'] & 0x3800) >> 11) *   1;              // The first 3 bits of this 14-bit field represent the time in seconds, with valid values from 0�7 (representing 0-7 seconds)
				$thisfile_ac3['timecode2'] += (($thisfile_ac3_raw_bsi['timecod2'] & 0x07C0) >>  6) *  (1 / 30);        // The next 5 bits represents the time in frames, with valid values from 0�29 (one frame = 1/30th of a second)
				$thisfile_ac3['timecode2'] += (($thisfile_ac3_raw_bsi['timecod2'] & 0x003F) >>  0) * ((1 / 30) / 60);  // The final 6 bits represents fractions of 1/64 of a frame, with valid values from 0�63
			}

			$thisfile_ac3_raw_bsi['flags']['addbsi'] = (bool) $this->readHeaderBSI(1);
			if ($thisfile_ac3_raw_bsi['flags']['addbsi']) {
				$thisfile_ac3_raw_bsi['addbsi_length'] = $this->readHeaderBSI(6) + 1; // This 6-bit code, which exists only if addbside is a 1, indicates the length in bytes of additional bit stream information. The valid range of addbsil is 0�63, indicating 1�64 additional bytes, respectively.

				$this->AC3header['bsi'] .= getid3_lib::BigEndian2Bin($this->fread($thisfile_ac3_raw_bsi['addbsi_length']));

				$thisfile_ac3_raw_bsi['addbsi_data'] = substr($this->AC3header['bsi'], $this->BSIoffset, $thisfile_ac3_raw_bsi['addbsi_length'] * 8);
				$this->BSIoffset += $thisfile_ac3_raw_bsi['addbsi_length'] * 8;
			}


		} elseif ($thisfile_ac3_raw_bsi['bsid'] <= 16) { // E-AC3


			$this->error('E-AC3 parsing is incomplete and experimental in this version of getID3 ('.$this->getid3->version().'). Notably the bitrate calculations are wrong -- value might (or not) be correct, but it is not calculated correctly. Email info@getid3.org if you know how to calculate EAC3 bitrate correctly.');
			$info['audio']['dataformat'] = 'eac3';

			$thisfile_ac3_raw_bsi['strmtyp']          =        $this->readHeaderBSI(2);
			$thisfile_ac3_raw_bsi['substreamid']      =        $this->readHeaderBSI(3);
			$thisfile_ac3_raw_bsi['frmsiz']           =        $this->readHeaderBSI(11);
			$thisfile_ac3_raw_bsi['fscod']            =        $this->readHeaderBSI(2);
			if ($thisfile_ac3_raw_bsi['fscod'] == 3) {
				$thisfile_ac3_raw_bsi['fscod2']       =        $this->readHeaderBSI(2);
				$thisfile_ac3_raw_bsi['numblkscod'] = 3; // six blocks per syncframe
			} else {
				$thisfile_ac3_raw_bsi['numblkscod']   =        $this->readHeaderBSI(2);
			}
			$thisfile_ac3['bsi']['blocks_per_sync_frame'] = self::blocksPerSyncFrame($thisfile_ac3_raw_bsi['numblkscod']);
			$thisfile_ac3_raw_bsi['acmod']            =        $this->readHeaderBSI(3);
			$thisfile_ac3_raw_bsi['flags']['lfeon']   = (bool) $this->readHeaderBSI(1);
			$thisfile_ac3_raw_bsi['bsid']             =        $this->readHeaderBSI(5); // we already know this from pre-parsing the version identifier, but re-read it to let the bitstream flow as intended
			$thisfile_ac3_raw_bsi['dialnorm']         =        $this->readHeaderBSI(5);
			$thisfile_ac3_raw_bsi['flags']['compr']       = (bool) $this->readHeaderBSI(1);
			if ($thisfile_ac3_raw_bsi['flags']['compr']) {
				$thisfile_ac3_raw_bsi['compr']        =        $this->readHeaderBSI(8);
			}
			if ($thisfile_ac3_raw_bsi['acmod'] == 0) { // if 1+1 mode (dual mono, so some items need a second value)
				$thisfile_ac3_raw_bsi['dialnorm2']    =        $this->readHeaderBSI(5);
				$thisfile_ac3_raw_bsi['flags']['compr2']  = (bool) $this->readHeaderBSI(1);
				if ($thisfile_ac3_raw_bsi['flags']['compr2']) {
					$thisfile_ac3_raw_bsi['compr2']   =        $this->readHeaderBSI(8);
				}
			}
			if ($thisfile_ac3_raw_bsi['strmtyp'] == 1) { // if dependent stream
				$thisfile_ac3_raw_bsi['flags']['chanmap'] = (bool) $this->readHeaderBSI(1);
				if ($thisfile_ac3_raw_bsi['flags']['chanmap']) {
					$thisfile_ac3_raw_bsi['chanmap']  =        $this->readHeaderBSI(8);
				}
			}
			$thisfile_ac3_raw_bsi['flags']['mixmdat']     = (bool) $this->readHeaderBSI(1);
			if ($thisfile_ac3_raw_bsi['flags']['mixmdat']) { // Mixing metadata
				if ($thisfile_ac3_raw_bsi['acmod'] > 2) { // if more than 2 channels
					$thisfile_ac3_raw_bsi['dmixmod']  =        $this->readHeaderBSI(2);
				}
				if (($thisfile_ac3_raw_bsi['acmod'] & 0x01) && ($thisfile_ac3_raw_bsi['acmod'] > 2)) { // if three front channels exist
					$thisfile_ac3_raw_bsi['ltrtcmixlev'] =        $this->readHeaderBSI(3);
					$thisfile_ac3_raw_bsi['lorocmixlev'] =        $this->readHeaderBSI(3);
				}
				if ($thisfile_ac3_raw_bsi['acmod'] & 0x04) { // if a surround channel exists
					$thisfile_ac3_raw_bsi['ltrtsurmixlev'] =        $this->readHeaderBSI(3);
					$thisfile_ac3_raw_bsi['lorosurmixlev'] =        $this->readHeaderBSI(3);
				}
				if ($thisfile_ac3_raw_bsi['flags']['lfeon']) { // if the LFE channel exists
					$thisfile_ac3_raw_bsi['flags']['lfemixlevcod'] = (bool) $this->readHeaderBSI(1);
					if ($thisfile_ac3_raw_bsi['flags']['lfemixlevcod']) {
						$thisfile_ac3_raw_bsi['lfemixlevcod']  =        $this->readHeaderBSI(5);
					}
				}
				if ($thisfile_ac3_raw_bsi['strmtyp'] == 0) { // if independent stream
					$thisfile_ac3_raw_bsi['flags']['pgmscl'] = (bool) $this->readHeaderBSI(1);
					if ($thisfile_ac3_raw_bsi['flags']['pgmscl']) {
						$thisfile_ac3_raw_bsi['pgmscl']  =        $this->readHeaderBSI(6);
					}
					if ($thisfile_ac3_raw_bsi['acmod'] == 0) { // if 1+1 mode (dual mono, so some items need a second value)
						$thisfile_ac3_raw_bsi['flags']['pgmscl2'] = (bool) $this->readHeaderBSI(1);
						if ($thisfile_ac3_raw_bsi['flags']['pgmscl2']) {
							$thisfile_ac3_raw_bsi['pgmscl2']  =        $this->readHeaderBSI(6);
						}
					}
					$thisfile_ac3_raw_bsi['flags']['extpgmscl'] = (bool) $this->readHeaderBSI(1);
					if ($thisfile_ac3_raw_bsi['flags']['extpgmscl']) {
						$thisfile_ac3_raw_bsi['extpgmscl']  =        $this->readHeaderBSI(6);
					}
					$thisfile_ac3_raw_bsi['mixdef']  =        $this->readHeaderBSI(2);
					if ($thisfile_ac3_raw_bsi['mixdef'] == 1) { // mixing option 2
						$thisfile_ac3_raw_bsi['premixcmpsel']  = (bool) $this->readHeaderBSI(1);
						$thisfile_ac3_raw_bsi['drcsrc']        = (bool) $this->readHeaderBSI(1);
						$thisfile_ac3_raw_bsi['premixcmpscl']  =        $this->readHeaderBSI(3);
					} elseif ($thisfile_ac3_raw_bsi['mixdef'] == 2) { // mixing option 3
						$thisfile_ac3_raw_bsi['mixdata']       =        $this->readHeaderBSI(12);
					} elseif ($thisfile_ac3_raw_bsi['mixdef'] == 3) { // mixing option 4
						$mixdefbitsread = 0;
						$thisfile_ac3_raw_bsi['mixdeflen']     =        $this->readHeaderBSI(5); $mixdefbitsread += 5;
						$thisfile_ac3_raw_bsi['flags']['mixdata2'] = (bool) $this->readHeaderBSI(1); $mixdefbitsread += 1;
						if ($thisfile_ac3_raw_bsi['flags']['mixdata2']) {
							$thisfile_ac3_raw_bsi['premixcmpsel']  = (bool) $this->readHeaderBSI(1); $mixdefbitsread += 1;
							$thisfile_ac3_raw_bsi['drcsrc']        = (bool) $this->readHeaderBSI(1); $mixdefbitsread += 1;
							$thisfile_ac3_raw_bsi['premixcmpscl']  =        $this->readHeaderBSI(3); $mixdefbitsread += 3;
							$thisfile_ac3_raw_bsi['flags']['extpgmlscl']   = (bool) $this->readHeaderBSI(1); $mixdefbitsread += 1;
							if ($thisfile_ac3_raw_bsi['flags']['extpgmlscl']) {
								$thisfile_ac3_raw_bsi['extpgmlscl']    =        $this->readHeaderBSI(4); $mixdefbitsread += 4;
							}
							$thisfile_ac3_raw_bsi['flags']['extpgmcscl']   = (bool) $this->readHeaderBSI(1); $mixdefbitsread += 1;
							if ($thisfile_ac3_raw_bsi['flags']['extpgmcscl']) {
								$thisfile_ac3_raw_bsi['extpgmcscl']    =        $this->readHeaderBSI(4); $mixdefbitsread += 4;
							}
							$thisfile_ac3_raw_bsi['flags']['extpgmrscl']   = (bool) $this->readHeaderBSI(1); $mixdefbitsread += 1;
							if ($thisfile_ac3_raw_bsi['flags']['extpgmrscl']) {
								$thisfile_ac3_raw_bsi['extpgmrscl']    =        $this->readHeaderBSI(4);
							}
							$thisfile_ac3_raw_bsi['flags']['extpgmlsscl']  = (bool) $this->readHeaderBSI(1); $mixdefbitsread += 1;
							if ($thisfile_ac3_raw_bsi['flags']['extpgmlsscl']) {
								$thisfile_ac3_raw_bsi['extpgmlsscl']   =        $this->readHeaderBSI(4); $mixdefbitsread += 4;
							}
							$thisfile_ac3_raw_bsi['flags']['extpgmrsscl']  = (bool) $this->readHeaderBSI(1); $mixdefbitsread += 1;
							if ($thisfile_ac3_raw_bsi['flags']['extpgmrsscl']) {
								$thisfile_ac3_raw_bsi['extpgmrsscl']   =        $this->readHeaderBSI(4); $mixdefbitsread += 4;
							}
							$thisfile_ac3_raw_bsi['flags']['extpgmlfescl'] = (bool) $this->readHeaderBSI(1); $mixdefbitsread += 1;
							if ($thisfile_ac3_raw_bsi['flags']['extpgmlfescl']) {
								$thisfile_ac3_raw_bsi['extpgmlfescl']  =        $this->readHeaderBSI(4); $mixdefbitsread += 4;
							}
							$thisfile_ac3_raw_bsi['flags']['dmixscl']      = (bool) $this->readHeaderBSI(1); $mixdefbitsread += 1;
							if ($thisfile_ac3_raw_bsi['flags']['dmixscl']) {
								$thisfile_ac3_raw_bsi['dmixscl']       =        $this->readHeaderBSI(4); $mixdefbitsread += 4;
							}
							$thisfile_ac3_raw_bsi['flags']['addch']        = (bool) $this->readHeaderBSI(1); $mixdefbitsread += 1;
							if ($thisfile_ac3_raw_bsi['flags']['addch']) {
								$thisfile_ac3_raw_bsi['flags']['extpgmaux1scl']   = (bool) $this->readHeaderBSI(1); $mixdefbitsread += 1;
								if ($thisfile_ac3_raw_bsi['flags']['extpgmaux1scl']) {
									$thisfile_ac3_raw_bsi['extpgmaux1scl']    =        $this->readHeaderBSI(4); $mixdefbitsread += 4;
								}
								$thisfile_ac3_raw_bsi['flags']['extpgmaux2scl']   = (bool) $this->readHeaderBSI(1); $mixdefbitsread += 1;
								if ($thisfile_ac3_raw_bsi['flags']['extpgmaux2scl']) {
									$thisfile_ac3_raw_bsi['extpgmaux2scl']    =        $this->readHeaderBSI(4); $mixdefbitsread += 4;
								}
							}
						}
						$thisfile_ac3_raw_bsi['flags']['mixdata3'] = (bool) $this->readHeaderBSI(1); $mixdefbitsread += 1;
						if ($thisfile_ac3_raw_bsi['flags']['mixdata3']) {
							$thisfile_ac3_raw_bsi['spchdat']   =        $this->readHeaderBSI(5); $mixdefbitsread += 5;
							$thisfile_ac3_raw_bsi['flags']['addspchdat'] = (bool) $this->readHeaderBSI(1); $mixdefbitsread += 1;
							if ($thisfile_ac3_raw_bsi['flags']['addspchdat']) {
								$thisfile_ac3_raw_bsi['spchdat1']   =         $this->readHeaderBSI(5); $mixdefbitsread += 5;
								$thisfile_ac3_raw_bsi['spchan1att'] =         $this->readHeaderBSI(2); $mixdefbitsread += 2;
								$thisfile_ac3_raw_bsi['flags']['addspchdat1'] = (bool) $this->readHeaderBSI(1); $mixdefbitsread += 1;
								if ($thisfile_ac3_raw_bsi['flags']['addspchdat1']) {
									$thisfile_ac3_raw_bsi['spchdat2']   =         $this->readHeaderBSI(5); $mixdefbitsread += 5;
									$thisfile_ac3_raw_bsi['spchan2att'] =         $this->readHeaderBSI(3); $mixdefbitsread += 3;
								}
							}
						}
						$mixdata_bits = (8 * ($thisfile_ac3_raw_bsi['mixdeflen'] + 2)) - $mixdefbitsread;
						$mixdata_fill = (($mixdata_bits % 8) ? 8 - ($mixdata_bits % 8) : 0);
						$thisfile_ac3_raw_bsi['mixdata']     =        $this->readHeaderBSI($mixdata_bits);
						$thisfile_ac3_raw_bsi['mixdatafill'] =        $this->readHeaderBSI($mixdata_fill);
						unset($mixdefbitsread, $mixdata_bits, $mixdata_fill);
					}
					if ($thisfile_ac3_raw_bsi['acmod'] < 2) { // if mono or dual mono source
						$thisfile_ac3_raw_bsi['flags']['paninfo'] = (bool) $this->readHeaderBSI(1);
						if ($thisfile_ac3_raw_bsi['flags']['paninfo']) {
							$thisfile_ac3_raw_bsi['panmean']   =        $this->readHeaderBSI(8);
							$thisfile_ac3_raw_bsi['paninfo']   =        $this->readHeaderBSI(6);
						}
						if ($thisfile_ac3_raw_bsi['acmod'] == 0) { // if 1+1 mode (dual mono, so some items need a second value)
							$thisfile_ac3_raw_bsi['flags']['paninfo2'] = (bool) $this->readHeaderBSI(1);
							if ($thisfile_ac3_raw_bsi['flags']['paninfo2']) {
								$thisfile_ac3_raw_bsi['panmean2']   =        $this->readHeaderBSI(8);
								$thisfile_ac3_raw_bsi['paninfo2']   =        $this->readHeaderBSI(6);
							}
						}
					}
					$thisfile_ac3_raw_bsi['flags']['frmmixcfginfo'] = (bool) $this->readHeaderBSI(1);
					if ($thisfile_ac3_raw_bsi['flags']['frmmixcfginfo']) { // mixing configuration information
						if ($thisfile_ac3_raw_bsi['numblkscod'] == 0) {
							$thisfile_ac3_raw_bsi['blkmixcfginfo'][0]  =        $this->readHeaderBSI(5);
						} else {
							for ($blk = 0; $blk < $thisfile_ac3_raw_bsi['numblkscod']; $blk++) {
								$thisfile_ac3_raw_bsi['flags']['blkmixcfginfo'.$blk] = (bool) $this->readHeaderBSI(1);
								if ($thisfile_ac3_raw_bsi['flags']['blkmixcfginfo'.$blk]) { // mixing configuration information
									$thisfile_ac3_raw_bsi['blkmixcfginfo'][$blk]  =        $this->readHeaderBSI(5);
								}
							}
						}
					}
				}
			}
			$thisfile_ac3_raw_bsi['flags']['infomdat']          = (bool) $this->readHeaderBSI(1);
			if ($thisfile_ac3_raw_bsi['flags']['infomdat']) { // Informational metadata
				$thisfile_ac3_raw_bsi['bsmod']                  =        $this->readHeaderBSI(3);
				$thisfile_ac3_raw_bsi['flags']['copyrightb']    = (bool) $this->readHeaderBSI(1);
				$thisfile_ac3_raw_bsi['flags']['origbs']        = (bool) $this->readHeaderBSI(1);
				if ($thisfile_ac3_raw_bsi['acmod'] == 2) { //  if in 2/0 mode
					$thisfile_ac3_raw_bsi['dsurmod']            =        $this->readHeaderBSI(2);
					$thisfile_ac3_raw_bsi['dheadphonmod']       =        $this->readHeaderBSI(2);
				}
				if ($thisfile_ac3_raw_bsi['acmod'] >= 6) { //  if both surround channels exist
					$thisfile_ac3_raw_bsi['dsurexmod']          =        $this->readHeaderBSI(2);
				}
				$thisfile_ac3_raw_bsi['flags']['audprodi']      = (bool) $this->readHeaderBSI(1);
				if ($thisfile_ac3_raw_bsi['flags']['audprodi']) {
					$thisfile_ac3_raw_bsi['mixlevel']           =        $this->readHeaderBSI(5);
					$thisfile_ac3_raw_bsi['roomtyp']            =        $this->readHeaderBSI(2);
					$thisfile_ac3_raw_bsi['flags']['adconvtyp'] = (bool) $this->readHeaderBSI(1);
				}
				if ($thisfile_ac3_raw_bsi['acmod'] == 0) { //  if 1+1 mode (dual mono, so some items need a second value)
					$thisfile_ac3_raw_bsi['flags']['audprodi2']      = (bool) $this->readHeaderBSI(1);
					if ($thisfile_ac3_raw_bsi['flags']['audprodi2']) {
						$thisfile_ac3_raw_bsi['mixlevel2']           =        $this->readHeaderBSI(5);
						$thisfile_ac3_raw_bsi['roomtyp2']            =        $this->readHeaderBSI(2);
						$thisfile_ac3_raw_bsi['flags']['adconvtyp2'] = (bool) $this->readHeaderBSI(1);
					}
				}
				if ($thisfile_ac3_raw_bsi['fscod'] < 3) { // if not half sample rate
					$thisfile_ac3_raw_bsi['flags']['sourcefscod'] = (bool) $this->readHeaderBSI(1);
				}
			}
			if (($thisfile_ac3_raw_bsi['strmtyp'] == 0) && ($thisfile_ac3_raw_bsi['numblkscod'] != 3)) { //  if both surround channels exist
				$thisfile_ac3_raw_bsi['flags']['convsync'] = (bool) $this->readHeaderBSI(1);
			}
			if ($thisfile_ac3_raw_bsi['strmtyp'] == 2) { //  if bit stream converted from AC-3
				if ($thisfile_ac3_raw_bsi['numblkscod'] != 3) { // 6 blocks per syncframe
					$thisfile_ac3_raw_bsi['flags']['blkid']  = 1;
				} else {
					$thisfile_ac3_raw_bsi['flags']['blkid']  = (bool) $this->readHeaderBSI(1);
				}
				if ($thisfile_ac3_raw_bsi['flags']['blkid']) {
					$thisfile_ac3_raw_bsi['frmsizecod']  =        $this->readHeaderBSI(6);
				}
			}
			$thisfile_ac3_raw_bsi['flags']['addbsi']  = (bool) $this->readHeaderBSI(1);
			if ($thisfile_ac3_raw_bsi['flags']['addbsi']) {
				$thisfile_ac3_raw_bsi['addbsil']  =        $this->readHeaderBSI(6);
				$thisfile_ac3_raw_bsi['addbsi']   =        $this->readHeaderBSI(($thisfile_ac3_raw_bsi['addbsil'] + 1) * 8);
			}

		} else {

			$this->error('Bit stream identification is version '.$thisfile_ac3_raw_bsi['bsid'].', but getID3() only understands up to version 16. Please submit a support ticket with a sample file.');
			unset($info['ac3']);
			return false;

		}

		if (isset($thisfile_ac3_raw_bsi['fscod2'])) {
			$thisfile_ac3['sample_rate'] = self::sampleRateCodeLookup2($thisfile_ac3_raw_bsi['fscod2']);
		} else {
			$thisfile_ac3['sample_rate'] = self::sampleRateCodeLookup($thisfile_ac3_raw_bsi['fscod']);
		}
		if ($thisfile_ac3_raw_bsi['fscod'] <= 3) {
			$info['audio']['sample_rate'] = $thisfile_ac3['sample_rate'];
		} else {
			$this->warning('Unexpected ac3.bsi.fscod value: '.$thisfile_ac3_raw_bsi['fscod']);
		}
		if (isset($thisfile_ac3_raw_bsi['frmsizecod'])) {
			$thisfile_ac3['frame_length'] = self::frameSizeLookup($thisfile_ac3_raw_bsi['frmsizecod'], $thisfile_ac3_raw_bsi['fscod']);
			$thisfile_ac3['bitrate']      = self::bitrateLookup($thisfile_ac3_raw_bsi['frmsizecod']);
		} elseif (!empty($thisfile_ac3_raw_bsi['frmsiz'])) {
			// this isn't right, but it's (usually) close, roughly 5% less than it should be.
			// but WHERE is the actual bitrate value stored in EAC3?? email info@getid3.org if you know!
			$thisfile_ac3['bitrate']      = ($thisfile_ac3_raw_bsi['frmsiz'] + 1) * 16 * 30; // The frmsiz field shall contain a value one less than the overall size of the coded syncframe in 16-bit words. That is, this field may assume a value ranging from 0 to 2047, and these values correspond to syncframe sizes ranging from 1 to 2048.
			// kludge-fix to make it approximately the expected value, still not "right":
			$thisfile_ac3['bitrate'] = round(($thisfile_ac3['bitrate'] * 1.05) / 16000) * 16000;
		}
		$info['audio']['bitrate'] = $thisfile_ac3['bitrate'];

		if (isset($thisfile_ac3_raw_bsi['bsmod']) && isset($thisfile_ac3_raw_bsi['acmod'])) {
			$thisfile_ac3['service_type'] = self::serviceTypeLookup($thisfile_ac3_raw_bsi['bsmod'], $thisfile_ac3_raw_bsi['acmod']);
		}
		$ac3_coding_mode = self::audioCodingModeLookup($thisfile_ac3_raw_bsi['acmod']);
		foreach($ac3_coding_mode as $key => $value) {
			$thisfile_ac3[$key] = $value;
		}
		switch ($thisfile_ac3_raw_bsi['acmod']) {
			case 0:
			case 1:
				$info['audio']['channelmode'] = 'mono';
				break;
			case 3:
			case 4:
				$info['audio']['channelmode'] = 'stereo';
				break;
			default:
				$info['audio']['channelmode'] = 'surround';
				break;
		}
		$info['audio']['channels'] = $thisfile_ac3['num_channels'];

		$thisfile_ac3['lfe_enabled'] = $thisfile_ac3_raw_bsi['flags']['lfeon'];
		if ($thisfile_ac3_raw_bsi['flags']['lfeon']) {
			$info['audio']['channels'] .= '.1';
		}

		$thisfile_ac3['channels_enabled'] = self::channelsEnabledLookup($thisfile_ac3_raw_bsi['acmod'], $thisfile_ac3_raw_bsi['flags']['lfeon']);
		$thisfile_ac3['dialogue_normalization'] = '-'.$thisfile_ac3_raw_bsi['dialnorm'].'dB';

		return true;
	}

	/**
	 * @param int $length
	 *
	 * @return int
	 */
	private function readHeaderBSI($length) {
		$data = substr($this->AC3header['bsi'], $this->BSIoffset, $length);
		$this->BSIoffset += $length;

		return bindec($data);
	}

	/**
	 * @param int $fscod
	 *
	 * @return int|string|false
	 */
	public static function sampleRateCodeLookup($fscod) {
		static $sampleRateCodeLookup = array(
			0 => 48000,
			1 => 44100,
			2 => 32000,
			3 => 'reserved' // If the reserved code is indicated, the decoder should not attempt to decode audio and should mute.
		);
		return (isset($sampleRateCodeLookup[$fscod]) ? $sampleRateCodeLookup[$fscod] : false);
	}

	/**
	 * @param int $fscod2
	 *
	 * @return int|string|false
	 */
	public static function sampleRateCodeLookup2($fscod2) {
		static $sampleRateCodeLookup2 = array(
			0 => 24000,
			1 => 22050,
			2 => 16000,
			3 => 'reserved' // If the reserved code is indicated, the decoder should not attempt to decode audio and should mute.
		);
		return (isset($sampleRateCodeLookup2[$fscod2]) ? $sampleRateCodeLookup2[$fscod2] : false);
	}

	/**
	 * @param int $bsmod
	 * @param int $acmod
	 *
	 * @return string|false
	 */
	public static function serviceTypeLookup($bsmod, $acmod) {
		static $serviceTypeLookup = array();
		if (empty($serviceTypeLookup)) {
			for ($i = 0; $i <= 7; $i++) {
				$serviceTypeLookup[0][$i] = 'main audio service: complete main (CM)';
				$serviceTypeLookup[1][$i] = 'main audio service: music and effects (ME)';
				$serviceTypeLookup[2][$i] = 'associated service: visually impaired (VI)';
				$serviceTypeLookup[3][$i] = 'associated service: hearing impaired (HI)';
				$serviceTypeLookup[4][$i] = 'associated service: dialogue (D)';
				$serviceTypeLookup[5][$i] = 'associated service: commentary (C)';
				$serviceTypeLookup[6][$i] = 'associated service: emergency (E)';
			}

			$serviceTypeLookup[7][1]      = 'associated service: voice over (VO)';
			for ($i = 2; $i <= 7; $i++) {
				$serviceTypeLookup[7][$i] = 'main audio service: karaoke';
			}
		}
		return (isset($serviceTypeLookup[$bsmod][$acmod]) ? $serviceTypeLookup[$bsmod][$acmod] : false);
	}

	/**
	 * @param int $acmod
	 *
	 * @return array|false
	 */
	public static function audioCodingModeLookup($acmod) {
		// array(channel configuration, # channels (not incl LFE), channel order)
		static $audioCodingModeLookup = array (
			0 => array('channel_config'=>'1+1', 'num_channels'=>2, 'channel_order'=>'Ch1,Ch2'),
			1 => array('channel_config'=>'1/0', 'num_channels'=>1, 'channel_order'=>'C'),
			2 => array('channel_config'=>'2/0', 'num_channels'=>2, 'channel_order'=>'L,R'),
			3 => array('channel_config'=>'3/0', 'num_channels'=>3, 'channel_order'=>'L,C,R'),
			4 => array('channel_config'=>'2/1', 'num_channels'=>3, 'channel_order'=>'L,R,S'),
			5 => array('channel_config'=>'3/1', 'num_channels'=>4, 'channel_order'=>'L,C,R,S'),
			6 => array('channel_config'=>'2/2', 'num_channels'=>4, 'channel_order'=>'L,R,SL,SR'),
			7 => array('channel_config'=>'3/2', 'num_channels'=>5, 'channel_order'=>'L,C,R,SL,SR'),
		);
		return (isset($audioCodingModeLookup[$acmod]) ? $audioCodingModeLookup[$acmod] : false);
	}

	/**
	 * @param int $cmixlev
	 *
	 * @return int|float|string|false
	 */
	public static function centerMixLevelLookup($cmixlev) {
		static $centerMixLevelLookup;
		if (empty($centerMixLevelLookup)) {
			$centerMixLevelLookup = array(
				0 => pow(2, -3.0 / 6), // 0.707 (-3.0 dB)
				1 => pow(2, -4.5 / 6), // 0.595 (-4.5 dB)
				2 => pow(2, -6.0 / 6), // 0.500 (-6.0 dB)
				3 => 'reserved'
			);
		}
		return (isset($centerMixLevelLookup[$cmixlev]) ? $centerMixLevelLookup[$cmixlev] : false);
	}

	/**
	 * @param int $surmixlev
	 *
	 * @return int|float|string|false
	 */
	public static function surroundMixLevelLookup($surmixlev) {
		static $surroundMixLevelLookup;
		if (empty($surroundMixLevelLookup)) {
			$surroundMixLevelLookup = array(
				0 => pow(2, -3.0 / 6),
				1 => pow(2, -6.0 / 6),
				2 => 0,
				3 => 'reserved'
			);
		}
		return (isset($surroundMixLevelLookup[$surmixlev]) ? $surroundMixLevelLookup[$surmixlev] : false);
	}

	/**
	 * @param int $dsurmod
	 *
	 * @return string|false
	 */
	public static function dolbySurroundModeLookup($dsurmod) {
		static $dolbySurroundModeLookup = array(
			0 => 'not indicated',
			1 => 'Not Dolby Surround encoded',
			2 => 'Dolby Surround encoded',
			3 => 'reserved'
		);
		return (isset($dolbySurroundModeLookup[$dsurmod]) ? $dolbySurroundModeLookup[$dsurmod] : false);
	}

	/**
	 * @param int  $acmod
	 * @param bool $lfeon
	 *
	 * @return array
	 */
	public static function channelsEnabledLookup($acmod, $lfeon) {
		$lookup = array(
			'ch1'=>($acmod == 0),
			'ch2'=>($acmod == 0),
			'left'=>($acmod > 1),
			'right'=>($acmod > 1),
			'center'=>(bool) ($acmod & 0x01),
			'surround_mono'=>false,
			'surround_left'=>false,
			'surround_right'=>false,
			'lfe'=>$lfeon);
		switch ($acmod) {
			case 4:
			case 5:
				$lookup['surround_mono']  = true;
				break;
			case 6:
			case 7:
				$lookup['surround_left']  = true;
				$lookup['surround_right'] = true;
				break;
		}
		return $lookup;
	}

	/**
	 * @param int $compre
	 *
	 * @return float|int
	 */
	public static function heavyCompression($compre) {
		// The first four bits indicate gain changes in 6.02dB increments which can be
		// implemented with an arithmetic shift operation. The following four bits
		// indicate linear gain changes, and require a 5-bit multiply.
		// We will represent the two 4-bit fields of compr as follows:
		//   X0 X1 X2 X3 . Y4 Y5 Y6 Y7
		// The meaning of the X values is most simply described by considering X to represent a 4-bit
		// signed integer with values from -8 to +7. The gain indicated by X is then (X + 1) * 6.02 dB. The
		// following table shows this in detail.

		// Meaning of 4 msb of compr
		//  7    +48.16 dB
		//  6    +42.14 dB
		//  5    +36.12 dB
		//  4    +30.10 dB
		//  3    +24.08 dB
		//  2    +18.06 dB
		//  1    +12.04 dB
		//  0     +6.02 dB
		// -1         0 dB
		// -2     -6.02 dB
		// -3    -12.04 dB
		// -4    -18.06 dB
		// -5    -24.08 dB
		// -6    -30.10 dB
		// -7    -36.12 dB
		// -8    -42.14 dB

		$fourbit = str_pad(decbin(($compre & 0xF0) >> 4), 4, '0', STR_PAD_LEFT);
		if ($fourbit[0] == '1') {
			$log_gain = -8 + bindec(substr($fourbit, 1));
		} else {
			$log_gain = bindec(substr($fourbit, 1));
		}
		$log_gain = ($log_gain + 1) * getid3_lib::RGADamplitude2dB(2);

		// The value of Y is a linear representation of a gain change of up to -6 dB. Y is considered to
		// be an unsigned fractional integer, with a leading value of 1, or: 0.1 Y4 Y5 Y6 Y7 (base 2). Y can
		// represent values between 0.111112 (or 31/32) and 0.100002 (or 1/2). Thus, Y can represent gain
		// changes from -0.28 dB to -6.02 dB.

		$lin_gain = (16 + ($compre & 0x0F)) / 32;

		// The combination of X and Y values allows compr to indicate gain changes from
		//  48.16 - 0.28 = +47.89 dB, to
		// -42.14 - 6.02 = -48.16 dB.

		return $log_gain - $lin_gain;
	}

	/**
	 * @param int $roomtyp
	 *
	 * @return string|false
	 */
	public static function roomTypeLookup($roomtyp) {
		static $roomTypeLookup = array(
			0 => 'not indicated',
			1 => 'large room, X curve monitor',
			2 => 'small room, flat monitor',
			3 => 'reserved'
		);
		return (isset($roomTypeLookup[$roomtyp]) ? $roomTypeLookup[$roomtyp] : false);
	}

	/**
	 * @param int $frmsizecod
	 * @param int $fscod
	 *
	 * @return int|false
	 */
	public static function frameSizeLookup($frmsizecod, $fscod) {
		// LSB is whether padding is used or not
		$padding     = (bool) ($frmsizecod & 0x01);
		$framesizeid =        ($frmsizecod & 0x3E) >> 1;

		static $frameSizeLookup = array();
		if (empty($frameSizeLookup)) {
			$frameSizeLookup = array (
				0  => array( 128,  138,  192),  //  32 kbps
				1  => array( 160,  174,  240),  //  40 kbps
				2  => array( 192,  208,  288),  //  48 kbps
				3  => array( 224,  242,  336),  //  56 kbps
				4  => array( 256,  278,  384),  //  64 kbps
				5  => array( 320,  348,  480),  //  80 kbps
				6  => array( 384,  416,  576),  //  96 kbps
				7  => array( 448,  486,  672),  // 112 kbps
				8  => array( 512,  556,  768),  // 128 kbps
				9  => array( 640,  696,  960),  // 160 kbps
				10 => array( 768,  834, 1152),  // 192 kbps
				11 => array( 896,  974, 1344),  // 224 kbps
				12 => array(1024, 1114, 1536),  // 256 kbps
				13 => array(1280, 1392, 1920),  // 320 kbps
				14 => array(1536, 1670, 2304),  // 384 kbps
				15 => array(1792, 1950, 2688),  // 448 kbps
				16 => array(2048, 2228, 3072),  // 512 kbps
				17 => array(2304, 2506, 3456),  // 576 kbps
				18 => array(2560, 2786, 3840)   // 640 kbps
			);
		}
		$paddingBytes = 0;
		if (($fscod == 1) && $padding) {
			// frame lengths are padded by 1 word (16 bits) at 44100
			// (fscode==1) means 44100Hz (see sampleRateCodeLookup)
			$paddingBytes = 2;
		}
		return (isset($frameSizeLookup[$framesizeid][$fscod]) ? $frameSizeLookup[$framesizeid][$fscod] + $paddingBytes : false);
	}

	/**
	 * @param int $frmsizecod
	 *
	 * @return int|false
	 */
	public static function bitrateLookup($frmsizecod) {
		// LSB is whether padding is used or not
		$padding     = (bool) ($frmsizecod & 0x01);
		$framesizeid =        ($frmsizecod & 0x3E) >> 1;

		static $bitrateLookup = array(
			 0 =>  32000,
			 1 =>  40000,
			 2 =>  48000,
			 3 =>  56000,
			 4 =>  64000,
			 5 =>  80000,
			 6 =>  96000,
			 7 => 112000,
			 8 => 128000,
			 9 => 160000,
			10 => 192000,
			11 => 224000,
			12 => 256000,
			13 => 320000,
			14 => 384000,
			15 => 448000,
			16 => 512000,
			17 => 576000,
			18 => 640000,
		);
		return (isset($bitrateLookup[$framesizeid]) ? $bitrateLookup[$framesizeid] : false);
	}

	/**
	 * @param int $numblkscod
	 *
	 * @return int|false
	 */
	public static function blocksPerSyncFrame($numblkscod) {
		static $blocksPerSyncFrameLookup = array(
			0 => 1,
			1 => 2,
			2 => 3,
			3 => 6,
		);
		return (isset($blocksPerSyncFrameLookup[$numblkscod]) ? $blocksPerSyncFrameLookup[$numblkscod] : false);
	}


}

38 Greatest Intercourse Toys For Couples In 2025 Bring Fresh Vibes\n<\/p>\n

We encourage you to get on the market, get romantic, and use them with a associate. No matter how a lot energy you use, you presumably can look forward to feeling a heightened degree of ecstasy. Every toy in our assortment is designed to resist hours of solo motion Hot Wild Leopard Hollowed-out Bikini One-piece Suit<\/a>0, so you do not have to hold back. Plus Strong Men Loose Transparent Mesh Pants<\/a>, we never use painful chrome steel material or itchy low-quality plastic.\n<\/p>\n

During intercourse, it will vibe for you both, whereas giving her slightly further clitoral stimulation. Oh, and while it is distant controlled, it’s potential to alter the settings with out it. BoyZshop\u2019s assortment of gay intercourse toys and merchandise spans multiple tastes and expertise ranges. Whether you\u2019re simply looking for a standard dildo or if you\u2019re exploring urethral play, BoyZshop provides choices for both … If it\u2019s sex toys you\u2019re in search of, the XBIZ Award winner for \u201cInternational Pleasure Products Company of the Year\u201d is an effective place to begin out.\n<\/p>\n

For these looking for a extra traditional design, and simply need a no-frills, high-performance masturbator Hot Wild Leopard Hollowed-out Bikini One-piece Suit<\/a>, then the Optimale Endurance deserves a look. Now go forth and get shopping\u2014because the couple who performs collectively, stays collectively. It\u2019s not daily you get to shine the banister (real euphemism for masturbation, by the way) in the name of product journalism. One of our picks ought to help you and your honey paddle the pink canoe or shuck corn. For $45 you get an ever-changing choice of TENGA toys, delivered for FREE, for so lengthy as you like.\n<\/p>\n

Check the filters in rthe menu to see how a lot girth or length a particular product will add. Remote Thrusting Panty Vibrator – $130This one is absolutely insane! Thumping New Arrival See-through Comfortable Mesh Boxers<\/a>, thrusting & pounding vibrator may be operated with a distant management.\n<\/p>\n

The ability to sync with videos or other Lovense toys was a giant plus for him. However 4pcs Strappy Hot Fishnet One-piece Suit Nightwear<\/a>, he did mention that the noise level may be a difficulty for those with thin walls. For couples in long-distance relationships Fashion Hot Selling Mesh Splicing Jumpsuit<\/a>, the Lovense Max 2 is a game-changer.\n<\/p>\n

Carol Queen, PhD Special Slitknot Designed Sleeveless One-piece Suit<\/a>, is an author, educator Wand AV Massage Vibrator<\/a>, and the employees sexologist for sex-toy retailer Good Vibes. Sign up for insider sex ideas, unique provides, and a shock only for you. Two long-term testers encountered points with the Maude Vibe\u2019s lithium-ion battery bricking within or simply after the one-year warranty interval, particularly in the event that they didn\u2019t keep the toy consistently charged. The Biird Namii is somewhat massive and cumbersome, and its vibrations had been weaker than these of comparable fashions we examined.\n<\/p>\n

These work by disinfecting and deep cleaning your toy to forestall any harmful micro organism or smells from building up over time. Silicone lubes have a quantity of advantages over water lubes, primarily being that they don\u2019t evaporate. For the most versatile, do-all lubricant, Elbow Grease H2O covers all the best bases. It is additional slippery, long-lasting, and has great consistency. The pump top is easy to use with one hand, which is very useful if you are already into the game along with your \u201chands full\u201d and must add a bit further. The base handle is also geared up with a finger grip, which lets you \u201crock\u201d it forwards and backwards and presents a pleasant quantity of management.\n<\/p>\n

Today Hot Red Slim Lace Splicing Jumpsuit For Women<\/a>, the most typical material is silicone, however thermoplastic elastomer and plastic are additionally very common. More experienced intercourse toy lovers may want to strive glass for sensation and weight play.Do All Powered Sex Toys Use Batteries? Vibration can add extra sensation to your sex toy experience, which you need to use for even better intercourse. But you don\u2019t necessarily have to replenish on batteries for powered toys. Many trendy toys provide rechargeable cords or USB recharging.Can I Get a Sex Toy That\u2019s Not Realistic?\n<\/p>\n

With powerful vibration settings and a fantastic battery life, the Magic Wand is a helluva wand vibrator for everyone. It has 4 speeds and feels great, and even if it’s dead Press Key Ankle & Wrist Spreader<\/a>, you must use it while it is charging. Put it in your clitoris (you may need to experiment with positions to find the one which feels best). Hold the ability button for one to two seconds to turn the toy on or off.\n<\/p>\n

An object that can open up sources of enjoyment that you just didn\u2019t know existed. A characteristic that all the objects we now have talked about must have in frequent for secure use is a flared base or, within the case of anal beads, a retrieval twine. Otherwise, the potential for the item being sucked into your physique may be very actual. Anal sex toys also wants to always be used in combination with a beneficiant quantity of lubricant to make insertion as pure as potential. With this said, sex toys are an efficient way to strive one thing new.<\/p>\n","protected":false},"excerpt":{"rendered":"

38 Greatest Intercourse Toys For Couples In 2025 Bring Fresh Vibes We encourage you to get on the market, get romantic, and use them with a associate. No matter how a lot energy you use, you presumably can look forward to feeling a heightened degree of ecstasy. Every toy in our assortment is designed to…<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":[],"categories":[1],"tags":[],"_links":{"self":[{"href":"https:\/\/mcpv.demarco.ddnsfree.com\/index.php\/wp-json\/wp\/v2\/posts\/14506"}],"collection":[{"href":"https:\/\/mcpv.demarco.ddnsfree.com\/index.php\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/mcpv.demarco.ddnsfree.com\/index.php\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/mcpv.demarco.ddnsfree.com\/index.php\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/mcpv.demarco.ddnsfree.com\/index.php\/wp-json\/wp\/v2\/comments?post=14506"}],"version-history":[{"count":1,"href":"https:\/\/mcpv.demarco.ddnsfree.com\/index.php\/wp-json\/wp\/v2\/posts\/14506\/revisions"}],"predecessor-version":[{"id":14507,"href":"https:\/\/mcpv.demarco.ddnsfree.com\/index.php\/wp-json\/wp\/v2\/posts\/14506\/revisions\/14507"}],"wp:attachment":[{"href":"https:\/\/mcpv.demarco.ddnsfree.com\/index.php\/wp-json\/wp\/v2\/media?parent=14506"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/mcpv.demarco.ddnsfree.com\/index.php\/wp-json\/wp\/v2\/categories?post=14506"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/mcpv.demarco.ddnsfree.com\/index.php\/wp-json\/wp\/v2\/tags?post=14506"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}